Threading Inserts

Insert Selection Process:

1. Determine thread size and minimum minor diameter.

2. Determine minimum bore size smaller than the minor diameter from "Spiralock Insert Selection Chart"

below.

3. Select appropriate insert blank size for minimum bore.

4. Select Spiralock EDP# for corresponding insert blank and pitch size using charts on the following page.

5. Select carbide grade and coating (if any).

Spiralock Insert Selection Chart
Min. Bore	Size	Pitch Range	Boring Bar #	Blank
0.240	06	20-32 T.P.I. (1.00-0.45 mm)	SIR 0205 H06	06 IR A 60
0.310	08	16-32 T.P.I. (1.50-0.45 mm)	SIR 0265 K08	08 IR (X) 60
0.350	08	16-32 T.P.I. (1.50-0.45 mm)	SIR 0310 K08	08 IR (X) 60
0.470	11	14-32 T.P.I. (1.75-0.45 mm)	SIR 0375 H11	11 IR A 60
0.470	11		SIR 0375 K11
0.470	11		SIR 0375 M11 C
0.580	11		SIR 0500 L11
0.580	11		SIR 0500 P11 C
0.640	16	7-32 T.P.I. (3.50-0.45 mm)	SIR 0500 M16	16 IR (X) 60
0.750	16		SIR 0625 P16
0.750	16		SIR 0625 R16 C
0.900	16		SIR 0750 P16
1.160	16		SIR 1000 R16
1.400	16		SIR 1250 S16
1.650	16		SIR 1500 T16
0.900	22	6 T.P.I. (5.00-0.45 mm)	SIR 0750 P22	22 IR N 60
1.160	22		SIR 1000 R22
1.500	22		SIR 1250 S22

Note: For assistance, please contact Spiralock Corporation at 248-543-7800 or 800-521-2688.

Internal Threading Inserts Laydown Style
Blank	Pitch	EDP#
11	32	90114
11	28	90116
11	27	90118
11	24	90120
11	20	90122
11	18	90124
11	16	90126
11	14	90128
16	32	90144
16	28	90146
16	27	90148
16	24	90150
16	20	90152
16	18	90154
16	16	90156
16	14	90158
16	13	90160
16	12	90162
16	11.5	90164
16	11	90166
16	10	90168
16	9	90170
16	8	90172
16	7	90174
22	6	90176

Internal Threading Inserts Laydown Style Metric Sizes
Blank	Pitch	EDP#
11	0.80	90014
11	1.00	90016
11	1.25	90018
11	1.50	90020
11	1.75	90022
16	0.80	90038
16	1.00	90040
16	1.25	90042
16	1.50	90044
16	1.75	90046
16	2.00	90048
16	2.50	90050
16	3.00	90052
22	3.50	90054
22	4.00	90056
22	4.50	90058
22	5.00	90060
27	5.50	90062
27	6.00	90064

Language